How Do Airplanes Land in Water?

iStock/oblong1
iStock/oblong1

Joe Shelton:

At least in terms of the physical act of landing, seaplanes and floatplanes land on the water pretty much in the same way that land based airplanes land on the ground.

They start with an appropriate approach airspeed, a slight flaring just before touching down, feeling it as the aircraft touches the water, and then it's slightly different. Because of the water's drag the aircraft will slow very quickly and settle into the water. Brakes aren't really needed. And that's good because they don't have any brakes that work in the water.

Once in the water they are as controllable as a boat. Which is to say, not that much. In fact, in the water they are navigated pretty much just like a boat.

Most if not all seaplanes and floatplanes have "water rudders" that allow them to steer in the water just like a boat. But as they approach a pier or beach you'll usually see the engine stopped and the pilot out on the float or leaning out of the aircraft with an oar rowing the boat to shore (sounds like a Peter, Paul, and Mary lyric).

If the question wonders why the aircraft don't sink, it's because they are designed to float.

Floatplanes are typically normal aircraft that have been outfitted with floats, usually two, one under each wing. Seaplanes, on the other hand, are designed specifically for water operations.

Many or even most floatplanes and seaplanes are what's called amphibious. That means that they can land and take off from both water and land. Typically they have retractable/extendable wheels (landing gear).

While it's important that an aircraft's landing gear has been extended when landing on the ground, it's equally important, if not more so, that the landing gear is retracted when landing on water.

Here's why:

The aircraft in the video is a "floatplane" with aftermarket floats.

a firefighting seaplane
iStock/Paolo Seimandi

This is a seaplane where the fuselage is designed to float like a boat. It also has floats, but they are part of the design.

a Piper Apache floatplane
Phil Hollenback, Flickr // CC BY-NC 2.0

This is a Piper Apache on floats. It's also the aircraft that I earned my Commercial Multiengine Seaplane rating in.

This post originally appeared on Quora. Click here to view.

Why Are There 10 Hot Dogs to a Pack But Only 8 Buns?

tacar/iStock via Getty Images
tacar/iStock via Getty Images

Watching competitive eating champion Joey Chestnut cram dozens of hot dogs down his throat would make anyone crave a grilled log of processed meat this summer. But shopping for hot dogs can be a confusing experience. The dogs are typically sold in packs of 10, but the buns are sold in packs of eight. What's behind this strange dog and bun inequality?

According to the National Hot Dog and Sausage Council—yes, there is a National Hot Dog and Sausage Council—there’s a good reason for the discrepancy. For starters, distributors of hot dogs are almost always different from manufacturers of baked goods like rolls. The hot dogs are sold in packs of 10 because producers of meat (or meat-like) products selected that quantity when hot dogs started to sell at retail grocery stores in the 1940s. Oscar Mayer, which led the charge into direct-to-consumer hot dog packaging, sold hot dogs by the pound in accordance with how meat is typically priced. Having 10 dogs that weighed 1.6 ounces each seemed like the ideal distribution of weight.

Bakeries, meanwhile, have standards of their own. Buns and sandwich rolls are usually sold eight to a pack because the baking trays for the elongated buns are typically sized to fit that number. Two sets of four buns come off the tray, which is the reason why buns are often still attached to one another when you open a bag.

These standards were created independently of one another: Bakeries weren’t too preoccupied with hot dogs when they were settling on a four-roll tray standard, and hot dog manufacturers weren’t thinking about how difficult it would be for bakeries to break from their conveyor system to offer 10 buns to a pack.

It can be frustrating if you buy just one or two packages of each, but if you’re hosting a big enough party, the uneven number doesn’t matter. You just need to buy five packages of buns and four packages of hot dogs to have 40 matching pairs. No complicated calculations required.

Have you got a Big Question you'd like us to answer? If so, let us know by emailing us at bigquestions@mentalfloss.com.

When Are the Dog Days of Summer?

Dorottya_Mathe/iStock via Getty Images
Dorottya_Mathe/iStock via Getty Images

The official “dog days” of summer begin on July 3 and end on August 11. So how did this time frame earn its canine nickname? It turns out the phrase has nothing to do with the poor pooches who are forever seeking shade in the July heat, and everything to do with the nighttime sky.

Sirius, the Dog Star, is the brightest star in the sky. The ancient Greeks noticed that in the summer months, Sirius rose and set with the Sun, and they theorized that it was the bright, glowing Dog Star that was adding extra heat to the Earth in July and August.

Have you got a Big Question you'd like us to answer? If so, let us know by emailing us at bigquestions@mentalfloss.com.

SECTIONS

arrow
LIVE SMARTER