CLOSE
Original image
YouTube / Roadtrippers

700 Hot Air Balloons (Timelapse)

Original image
YouTube / Roadtrippers

Last month in Albuquerque, over 700 hot air balloons lifted off as part of the 42nd annual International Balloon Fiesta. And they made a timelapse video. Make sure you set this to HD, and settle in for a few minutes of beautiful timelapse balloon magic:

Roadtrippers explains:

Beep.. Beep.. Beep.. The Alarm goes off at 4 am. Time to get ready for a morning full of hot air balloons! Eat a quick breakfast (maybe), grab the batteries off the chargers, cameras and warm clothes and head out for the field! This was my favourite part of shooting the Balloon Fiesta. The early morning anticipation running around the field in the dark trying to find the row of balloons that will go off for dawn patrol! The Balloon's will be all laid out on the ground and just as you start to see some light back-lighting the Sandia's mountains the first group of balloons start to inflate. The best pilots go up before the sunrise to find out what the wind conditions will be like for the day. They take off one after another into the dark of the morning. After that, it gets crazy.

Dawn Ascension is when all of the balloons (excluding dawn patrol) take off one after another starting just before the sunrise. There is so much to see and so many absolutely massive balloon's littering the field. Darth Vader's head fills and lifts above you. You watch it ascend into the glowing morning sky, surrounded by the hundreds of colors and shapes of balloons everywhere. In an impressively overwhelming way, 500+ balloons take off in the span of an hour and a half. When the field finally starts to empty, your heart starts to beat and you jump in your vehicle to chase after the still flying balloons. The balloons land anywhere they can in Albuquerque. From school yards, to back yards to the middle of the street, the whole community unites to pull the balloons from the sky and celebrate those rides of a lifetime.

(Via The Kid Should See This.)

Original image
iStock // Ekaterina Minaeva
technology
arrow
Man Buys Two Metric Tons of LEGO Bricks; Sorts Them Via Machine Learning
May 21, 2017
Original image
iStock // Ekaterina Minaeva

Jacques Mattheij made a small, but awesome, mistake. He went on eBay one evening and bid on a bunch of bulk LEGO brick auctions, then went to sleep. Upon waking, he discovered that he was the high bidder on many, and was now the proud owner of two tons of LEGO bricks. (This is about 4400 pounds.) He wrote, "[L]esson 1: if you win almost all bids you are bidding too high."

Mattheij had noticed that bulk, unsorted bricks sell for something like €10/kilogram, whereas sets are roughly €40/kg and rare parts go for up to €100/kg. Much of the value of the bricks is in their sorting. If he could reduce the entropy of these bins of unsorted bricks, he could make a tidy profit. While many people do this work by hand, the problem is enormous—just the kind of challenge for a computer. Mattheij writes:

There are 38000+ shapes and there are 100+ possible shades of color (you can roughly tell how old someone is by asking them what lego colors they remember from their youth).

In the following months, Mattheij built a proof-of-concept sorting system using, of course, LEGO. He broke the problem down into a series of sub-problems (including "feeding LEGO reliably from a hopper is surprisingly hard," one of those facts of nature that will stymie even the best system design). After tinkering with the prototype at length, he expanded the system to a surprisingly complex system of conveyer belts (powered by a home treadmill), various pieces of cabinetry, and "copious quantities of crazy glue."

Here's a video showing the current system running at low speed:

The key part of the system was running the bricks past a camera paired with a computer running a neural net-based image classifier. That allows the computer (when sufficiently trained on brick images) to recognize bricks and thus categorize them by color, shape, or other parameters. Remember that as bricks pass by, they can be in any orientation, can be dirty, can even be stuck to other pieces. So having a flexible software system is key to recognizing—in a fraction of a second—what a given brick is, in order to sort it out. When a match is found, a jet of compressed air pops the piece off the conveyer belt and into a waiting bin.

After much experimentation, Mattheij rewrote the software (several times in fact) to accomplish a variety of basic tasks. At its core, the system takes images from a webcam and feeds them to a neural network to do the classification. Of course, the neural net needs to be "trained" by showing it lots of images, and telling it what those images represent. Mattheij's breakthrough was allowing the machine to effectively train itself, with guidance: Running pieces through allows the system to take its own photos, make a guess, and build on that guess. As long as Mattheij corrects the incorrect guesses, he ends up with a decent (and self-reinforcing) corpus of training data. As the machine continues running, it can rack up more training, allowing it to recognize a broad variety of pieces on the fly.

Here's another video, focusing on how the pieces move on conveyer belts (running at slow speed so puny humans can follow). You can also see the air jets in action:

In an email interview, Mattheij told Mental Floss that the system currently sorts LEGO bricks into more than 50 categories. It can also be run in a color-sorting mode to bin the parts across 12 color groups. (Thus at present you'd likely do a two-pass sort on the bricks: once for shape, then a separate pass for color.) He continues to refine the system, with a focus on making its recognition abilities faster. At some point down the line, he plans to make the software portion open source. You're on your own as far as building conveyer belts, bins, and so forth.

Check out Mattheij's writeup in two parts for more information. It starts with an overview of the story, followed up with a deep dive on the software. He's also tweeting about the project (among other things). And if you look around a bit, you'll find bulk LEGO brick auctions online—it's definitely a thing!

Original image
Opening Ceremony
fun
arrow
These $425 Jeans Can Turn Into Jorts
May 19, 2017
Original image
Opening Ceremony

Modular clothing used to consist of something simple, like a reversible jacket. Today, it’s a $425 pair of detachable jeans.

Apparel retailer Opening Ceremony recently debuted a pair of “2 in 1 Y/Project” trousers that look fairly peculiar. The legs are held to the crotch by a pair of loops, creating a disjointed C-3PO effect. Undo the loops and you can now remove the legs entirely, leaving a pair of jean shorts in their wake. The result goes from this:

501069-OpeningCeremony2.jpg

Opening Ceremony

To this:

501069-OpeningCeremony3.jpg

Opening Ceremony

The company also offers a slightly different cut with button tabs in black for $460. If these aren’t audacious enough for you, the Y/Project line includes jumpsuits with removable legs and garter-equipped jeans.

[h/t Mashable]

SECTIONS
BIG QUESTIONS
BIG QUESTIONS
JOB SECRETS
QUIZZES
WORLD WAR 1
SMART SHOPPING
STONES, BONES, & WRECKS
#TBT
THE PRESIDENTS
WORDS
RETROBITUARIES